| Technical data
|
ERIKA 70
E | 
|
| Cutting width at
90° |
13 in.
(330
mm) |
| Cutting height |
0 - 2 51/64 in.
(0 - 72
mm) |
| Tilt |
-3 - 48
degrees |
| Revolutions - no
load |
2100-4200 rpm
(1/min) |
| Motor |
230 V |
| Power - input |
2.7 hp (2000
W) |
| Weight |
70.5 lbs (32
kg) |
|
|
Pull-push saw Erika 70 E
At 32 kg, the new Erika 70 E
pull-push saw is a
genuine lightweight, yet extremely rugged.
Thanks to
optimal rigidity the table profile of the Erika 70
E is
especially stable. Large surface areas on both sides of
the blade enable you to hold the workpiece steady. A
sound basis is provided by the responsive 2000 Watt
motor with E-control and variable speeds for a variety
of materials.
Smooth starting
delivers extra convenience, quiet and smooth running,
and a pleasant working environment. The built-in legs of
the Erika 70 E are folded out in a matter of
seconds to obtain an optimal working height even for
tall woodworkers. The new Erika 70 E is as easy to operate
as its predecessors, with the switches located on the
right. With easy access to all the controls for the
right hand, the left hand can remain on the
workpiece.
Also in keeping
with previous models is the dovetail profile, so that
existing accessories can remain in use.
Standard
accessories:
- 1 universal guide/fence, Ref. No.
201611
- 1 push stick, Ref. No. 034901
- 1 push
block handle, Ref. No. 201788
- 1 Allenkey SW 6, Ref.
No. 093081
Optional
accessories:
- Sliding table, compl., Ref. No.
038563
- Supporting rail 800 mm, Ref. No. 038291
-
Supporting rail 1000 mm, Ref. No. 038686
- Universal
fence/guide, Ref. No. 201611
- Fence/guide extension
1000 mm, Ref. No. 038392
- Connecting piece, Ref. No.
038393
- Telescopic rod compl. with sheet metal
support, Ref. No. 038309
- Drop stop, Ref. No.
038306
- Clamping piece, Ref. No. 038294
- Rip
fence/guide with micro adjustment, Ref. No. 035358
-
Odd-angle miter gauge DGA 900, Ref. No. 038560
-
Double cross and miter cut fence/guide
- Die-cast
extension table and Router table to be used in
connection with
LO 50 E
and LO 65 E, Ref. No. 202893 (for attachm. 2 supp. rails are
required)
- Adapter, Ref. No. 201180
- TCT blad,
225 x 2.5 x 30 mm, 32 teeth, Ref. No. 092460
-
TCT blad, 225 x 2.5 x 30 mm, 48 teeth, Ref. No.
092462
- TCT blad, 225 x 2.5 x 30 mm, 68 teeth,
Ref. No. 092464
Subject to technical
modification.
| Technical data |
ERIKA 70
E |
| Cutting width at 90° |
13 in.
(330 mm) |
| Cutting height |
0 - 2 51/64 in.
(0 - 72 mm) |
| Tilt |
-3 - 48 degrees |
| Revolutions - no load |
2100-4200 rpm (1/min) |
| Motor |
230 V |
| Power - input |
2.7 hp (2000 W) |
| Weight |
70.5 lbs (32 kg) |
 |
Back
to the top
| |
