Portable circular saw FSG 240 K
Laminated beams up to 9 5/8 in. (245 mm) thick can be square-edged
in a single cut, without overturning, with the FSG 240 K. For this purpose
it is recommended to use the special TCT blade. The cutting depth of
9 5/8 in. (245 mm) of the FSG 240 K is sufficient for all normal sized
laminated beams. And you can rely on the 5.8 hp (4350 W) motor
doing a consistently first-class job with all kinds of cutting operations
straight or tilted up to 48 degrees. Long handles and a large base
plate enable a safe handling of the machine and clean cuts. The
machine can also be run along a guide rail available as optional
accessory. Standard equipment includes a special chrome vanadium
steel briar-toothed saw blade with a diameter of 25 3/16 in. (640 mm).
Built-in thermal overload protection. Practical benefits derived from
expertise: the adjustable chip protection slide affords an unobstructed
view of the marking and keeps the chips away from the operator.

Of course, the FSG 240 K has a hose connector for attaching it to
a vacuum unit. The new star-delta switch with integral electronic motor
brake completes the picture of an ultra-modern carpentry machine that
is especially easy to handle despite its size and power.

Standard accessories:
- 1 CV saw blade, 640 mm (25 3/16 in.),
  briar tooth, 56 teeth, Ref. No. 092449
- 1 hose connector for chip extraction, Ref. No. 037205
- 1 open-end spanner 13 mm, Ref. No. 093075
- 1 open-end spanner 30 mm, Ref. No. 093061
- 1 hook spanner, Ref. No. 093094 
- 1 CEE socket for 400 V, Ref. No. 094027