|
|
|
|
| Technical data |
Cutting length /
Thickness of
stock |
8 7/16 in. / 1/2 in.
(215 mm / 12
mm) |
Cutting length /
Thickness of
stock |
5 1/8 in. / 2 31/64 in.
(130 mm / 63
mm) |
| Cutting height |
13/64 - 2 31/64 in.
(5 - 63
mm) |
| Tilt |
-2/0 - 45/47 degree |
Revolutions -
no load |
4720 rpm (1/min) |
Universal
single-phase motor |
230 V (+/-10%)
50/60 Hz |
| Power - input |
1.7 hp (1300 W) |
| Weight |
46.2 lbs (21
kg) | |
|
ERIKA 60 E - the new, compact pull-push
saw from MAFELL
Since
as early as 1980 MAFELL has been dedicating its
expertise and
know-how to the manufacture of
pull-push saws. Two models, the Erika 60 / 70
and the Erika 85, are invaluable to
professional carpenters, joiners and
interior
finishers. The action of these saws is
unique in that the workpiece is held
securely while
the blade is pulled through the material. This method
achieves
cuts of the highest quality. The new Erika 60 E from MAFELL is a new and
even
easier-to-use version of the pull-push saw.
Weighing just 46.3 lbs (21 kg), the
Erika 60 E offers a cutting length of 8 15/32
in. (215 mm) and a cutting height of
2 31/64 in. (63
mm). The 230 Volt universal motor allows the saw to be
used
anywhere. Principal advantages of the new Erika 60 E from MAFELL:
- Conversion from a
pull-push saw to a circular bench saw in a
matter of seconds
- High-precision cuts up to 2 31/64
in. (63 mm) deep and 8 15/32 in.
(215 mm)
long
- Sawblade can be tilted between - 2 degrees and
47 degrees for highly
accurate bevel cuts
-
Table insert with adjustable slot width for very small
cuts
- Openings in the sides allow the Erika 60 to be
carried easily
- Locking on-off switch with
undervoltage trip
- Standard universal guide fence
with automatic detent every 15 degrees
(can be
overridden), swivels through 90 degrees to both
sides
- Upper and lower saw guard covers with hose
connector
- Upper saw guard can be removed in seconds
for partial cuts
- Push stick located close to the
grip for safe work in compliance
with
guidelines
- Shock absorber cushions return movement
of the saw assembly
- Chip bag available as optional
accessory
- Practical optional accessories for
additional applications, including
fold-away
support, slide, graduated fence extension with
telescopic rod
and drop stop, extension table
and moulding table
New:
MAFELL has launched a new
moulding table that can be fastened to existing
Erika 55 / 60 pull-push saws as an
optional accessory. The Mafell LO 50 E
manual
plunging router can be incorporated into this moulding
table so that the
combination can be used as a small,
stationary moulding unit. The delivery
scope includes
a fence, shaw guard and hose connector for
chips.
Subject to technical
modification.
 |
Back
to the
top | | |
