|
|
|
|
Technical
data |
Single-phase
|
| Drilling
depth |
3
7/8 in. (100 mm) |
| Tools
used |
ring-groove
and
head countersink
cutting tools |
| Revolution
- no load |
340
- 1450 rpm |
| Universal
motor |
230/115
V |
| Power
- Input |
1.6
hp (1200 W) |
| Weight |
19.8
lbs (9 kg)
without drill mount |
|
|
| |
Carpenter's
drilling machine ZB 100 ES
The MAFELL ZB 100 ES is
a special machine for cutting grooves for
straight and conical rings and bulldog connectors. It permits
grooves
to be cut with absolute precision for all popular metal connector
types
with diameters up to 6 1/4 in. (160 mm). The machine speed can
be
continuously adjusted to match the relevant tool diameter. Maximum
safety is ensured by the special drill mount of the ZB
100 ES, which
is equipped with an anti-rotation element and protective cage
as
standard. For tasks requiring a head countersink all three drill
variants,
be it the ZB 100 ES, ZB
400 E or ZB 600 E, can be
used without the
stationary support, but with the auxiliary handle instead. Both
oblique
and perpendicular grooves can be made. In the case of perpendicular
grooves, the grooving depth of underlay washers, for example,
can be
set exactly with a stop and safety ring. All popular guide pilot
pins are
available for both groove cutting tools and head countersinks. |
 |
Standard accessories:
- 1 special drill mount for ring-groove cutting tools, Ref.
No. 039160
- 1 shaft for ring groove cutting tools, Ref. No. 039192
- 10 m (32.8 ft) cable with CEE-plug |
|
Optional accessories:
- Head countersink set in metal, Ref No. 090185
- Carrying case containing
|
Subject to technical modification.
 |
Back
to the top |
|
|
|
